8

I shudder when I find errant MegaBloks in my LEGO elements, but admit to admiring certain in-the-box models offered by them. I know the pictures depicted on the MB boxes are not actually photos of a completed MB model. They are computer enhanced images of what an ideal model would look like if MB pieces actually fit together correctly. Is there a link with images of any 100% LEGO element models built using MB instructions? If there isn't a link, can someone please post an example?

4
  • 1
    The first step would be to find a some MegaBloks instructions, unless you're possibly looking for someone who's already done this? Jan 13, 2012 at 21:25
  • 2
    The wording is confusing me. You want images of Megablok models built using LEGO bricks?
    – Pubby
    Jan 13, 2012 at 22:44
  • @Peter: Yep. Somebody must have done it. It is kind of tempting. Jan 14, 2012 at 0:19
  • 2
    @Pubby: Yes. I'd like to see examples of LEGO models constructed with Megablok instructions. Jan 14, 2012 at 0:19

3 Answers 3

7

Not necessarily.

It really depends on what you mean by "accurate." Most (probably 90% or more) of Mega Bloks elements have identical, or at least functionally identical, LEGO elements. However, there are a number of Mega Bloks elements that you can only approximate with LEGO elements. For example, Mega Bloks hinges rotate around the center of mass through 100+ degrees center at the vertical, whereas LEGO hinges rotate through 90 degrees from horizontal to vertical. Also, Mega Bloks has a SNOT piece with studs on both sides that LEGO unfortunately does not have.

If you are willing to slightly modify the instructions and accept a slightly different model, then yeah, you can reproduce anything made by Mega Bloks using LEGO elements. But if you want the models to be 100% accurate, then no, not all Mega Bloks sets can thusly be reproduced.

1
  • Yep, you can just see a number of elements in the photo in my compatibility answer (bricks.stackexchange.com/a/754/56) that I don't believe have a direct LEGO counterpart, from the hollow "frying pan" that Harry's holding, the 1x1 angular SNOT brick (the LEGO one is much thinner, and doesn't have a stud on both sides, but a hole on top), the rounded double lights and even the sloped brick they are attached to. I'll try and dig the model out and see if I can photo all the different bits. Jan 14, 2012 at 7:46
1

You could conceivably do it, but the flat Megablock bricks are thicker than Legos, so the Lego creation may seem long and flat.

1

Yes - I remember as a child, I built the USS Kittyhawk (a set that is an absolute nightmare to build with Mega Bloks) out of LEGO parts. All of the pieces, aside from the stickers, have either an exact or pretty close LEGO equivalent. You will also need to do the deck with plates instead of the large MegaBlok plates, but this allows for much more detail and a more realistic looking carrier deck.

http://www.amazon.com/MEGA-BLOKS-PROBUILDER-USS-KITTYHAWK/dp/B00004TRZY

Unfortunately, it was so long ago that I can't find any pictures of what I built. I do remember that you need a lot of gray bricks. I would recommend this set above all the other MegaBlok sets for replication in LEGO, as its a massive build and especially fun when built with pieces that actually stick together. And its a lot more fun to plan out all the LEGO pieces you need and salvage them from the Internet than to get them all in neat little bags.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.