LEGO® Answers is a question and answer site for LEGO® and building block enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have seen a few custom minifigures out there with images on certain body parts never produced by LEGO. What is the best way to achieve this? I have heard of some people printing out the image on paper and gluing it, but I don't want to do that. That would look horrible even if I got the background of the picture to be the same color as the plain piece. I've also heard of printing an image onto sticker paper and applying it. That would probably work on a torso, but probably would do a bad job of deforming around legs, heads, or certain types of helmets. Anyone got any other ideas?

share|improve this question
There are some people out there doing brick printing, but as far as I know it requires flat surfaces. – Joubarc Nov 3 '11 at 17:46
If you want actual printing onto Minifigures there is – Lawrence Mar 6 '12 at 17:51
Ah, that's nice. But it doesn't have quite as much customability as I would like. – HaydenStudios Mar 23 '12 at 19:05
up vote 17 down vote accepted

You can do that with scale model water decals. You can buy that in blank sheets and print out your designs with an inkjet printer. You can also use products that help those water decals set (adhere) and conform to the surface deformation and use scale model varnishes to seal it in place.

Shopping list:

  • Water decal sheets
  • Setting solution (sticks better)
  • Solvent solution (conforms to the surface)
  • Varnish/Finish

As stated in this other question about painting Lego bricks: Don't expect it to sustain the normal usage of Lego bricks. This is good for display or light usage (like playing D&D with custom minifigures)

share|improve this answer
Are these like transfers or are they more like the stickers you get in LEGO sets? – Ambo100 Nov 23 '11 at 17:48
They are decals (transfers). the same stuff used for scale models. – pcantin Nov 23 '11 at 18:06
That's a shame, the question I just deleted was about the stickers that come with LEGO sets. – Ambo100 Nov 23 '11 at 18:14
This question is about 'How to add an image to a LEGO minifigure'. @HaydenStudios covers paint, printing and stickers in his question. I guess if you need to know specifics about stickers and not transfers-decals you could ask that question, but your original question didn't sound like that (to me a least). – pcantin Nov 23 '11 at 18:53

The way that Lego does it is with whats called a "pad printer". also uses a pad printer. It takes a lot of skill to get the printing to work correctly. You have to have the proper amount of solvent in the ink to get it to adhere to the part and not smudge. The solvent also softens the ABS plastic so that the ink actually embeds into the part.

Pad printers are also quite expensive. On the order of tens of thousands of $$$ for one that will do multiple colors in sequence.

I've been looking at using special "direct to substrate" (DTS) printers. There is an inkjet printer that has a 5000+ dpi resolution, can print on ABS using solvent inks, can print on an object upto 2" thick, and also has the capability of printing pigmented white ink (so you don't have to only print on white bricks). This printer is also expensive, though not as expensive as a pad printer. Used on eBay runs about $5000.

For the general user, it's probably best to stick with water slide decals, since the average cost of a 8.5"x11" sheet of decal paper is about $1. There are different kinds of paper (inkjet and laser), so make sure you get the right kind for your printer. Laser printed decals do not REQUIRE a clear coat to protect them, but I still do.

I also use an ALPS printer that uses resin based inks. The printer has been discontinued, but the supplies are still available. Generally colors are printed in layers, but in addition to the cyan, yellow, magenta and black ribbons, there are metallic silver, metallic gold, chrome silver, chrome gold, chrome magenta, chrome cyan and the most important color, white. This allows ALPS owners to lay down a layer of white (opaque), then add the semi-transparent (cyan, yellow and magenta) inks on top. Kodak used to make a printer (First Check) that used compatible ink cartridges and they also produced a Red, Blue, Green and Orange ink. Useful if you can find them, but pretty much impossible to find.

share|improve this answer

just looking around I see that used pad printers are not really so expensive if you plan to do a lot of bricks you might look into getting one here.

share|improve this answer
I don't think BrickPrinter sells used Pad Printers - are you suggesting they should bulk order from them? Even second-hand multi-colour pad printers seem to be listing around £2,000+ – Zhaph - Ben Duguid Jan 28 '15 at 12:31

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.