Take the 2-minute tour ×
LEGO® Answers is a question and answer site for LEGO® and building block enthusiasts. It's 100% free, no registration required.

Is there any rhyme or reason to the way LEGO part are named? Failing that, is there any other sort of taxonomy that we can use to find specific parts?

Along the same lines, my impression is that smaller sets have larger numbers -- is there any truth to that? Is there anything that we can discern this from either part or set numbers?

Finally, where can I look up all these numbers?

share|improve this question
add comment

1 Answer 1

up vote 15 down vote accepted

Usually, the LEGO group doesn't seem to have much organisation; at least in the past. That's why you can find sets with two different numbers, or two different sets with the same number.

Now the keyword here is "seem", as I suppose there was some logic to it even in the past.

But nowadays there is some logic, and even if not all of it is understandable, you can at least spot some key elements, such as:

  • When I was a kid and they started the 4 digits scheme, the first digit indicated the global theme pretty clearly. 8 was Technic, 6 was LEGOLAND, 77 were trains, and so on. At least for trains, they tended to use round numbers for bigger sets, ending in 0 or 5.

  • Now, the first digit seems to have lost its significance, and sets in the same theme are usually attributed a range of numbers, with the small set getting the lowest number. It's not an absolute rule, and I guess it depends on availibility or other factors.

  • Sets in the 10000 range are LEGO shop exclusives. Usually, you will usually only find them on Shop@Home or in LEGO retail outlets, but not in regular toy stores.

  • Sets in the 20000 range were used for the BrickMaster serie, with each set accompanying a BrickMaster issue.

  • Sets in the 20200 range will seemingly be used by the "LEGO Master Builder Academy" sets

  • Sets in the 21000 rang are architecture sets.

  • Sets in the 30000 range are usually small promotionnal polybags

In addition, there are 7-digits numbers floating around which are probably some other form of internal numbers. For specific things without a set number, that's usually the only thing you'll find.


For parts, you have to distinguish design ID, identifying a specific mould regardless of the color; and element ID, which identifies a unique design/color combination.

I don't know how design IDs were or are attributed, but it seems there is now some sequential logic behind it. Not that changes in design which don't affect the functionality (hollow bars at the bottom of 1x bricks, for example) don't usually lead to a new design number (while peeron will append a "a", "b",... to indicate the version, LEGO doesn't do that internally).

Element IDs used to be a juxtaposition of design ID and color ID, so a Black (26) 2x4 brick (3001) would be simply 300126. These numbers are still around for parts which existed when that scheme was used. 300126 is still the element ID of a black 2x4 brick.

However, at some point (not sure when), they changed this to use a 7-digit number for the element ID, which doesn't ahve a relation to the design ID or color any longer. These seem to be sequentially attributed, and it could be that they share the same sequence as internal set numbers (but that's just a guess, really). There are also numbers for individual instruction booklets, which ROSCO used to scan for directly on the LEGO site.


As for where to find these, that's more difficult. You'll notice I link a lot to BrickSet, that's because I feel they do a fantastic job of cataloguing sets. Peeron has a good database too, but it's usually slower.

For parts, you'll need to go to Peeron, or BrickLink, but they sometimes differ in their numbering when the official number of a part isn't known. Note that they usually use design IDs and not element IDs, although there is some work in progress regarding that.

Of course, while internal LEGO aren't exactly public, you can find design IDs embossed in elements, and element IDs in the back of all instruction leaflets. Also, the online pick-a-brick and the custoemr service "replacement part" function let you browse recent sets and see what the design and element IDs are for given elements.

share|improve this answer
1  
Great answer -- thanks for taking the time. I'm sure many future Bricks users will benefit from it. –  Caleb Nov 15 '11 at 11:44
1  
@Caleb you're welcome - if you feel it's the correct one, you may want to proclaim it by accepting it, too. –  Joubarc Nov 21 '11 at 20:59
1  
I usually avoid accepting an answer right away so as not to deter other answers. Looks like your answer is so comprehensive that nobody else has anything to add. ;-) –  Caleb Nov 21 '11 at 21:07
    
Don't think I don't feel shame for asking you to do it - I too would appreciate other answers, but I don't think it'll happen here. –  Joubarc Nov 21 '11 at 21:40
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.