Take the 2-minute tour ×
LEGO® Answers is a question and answer site for LEGO® and building block enthusiasts. It's 100% free, no registration required.

I'd like to make my own stickers like the ones produced for LEGO sets using a design I've made in Photoshop.

  • What do I need to make stickers for LEGO, what kind of printer do I need?
  • Will the stickers be able to come of my LEGO bricks cleanly?
  • Can I also get sticker paper on a transparent sheet?
share|improve this question
    
    
@aedia: I was under the impression that question was about printing directly onto LEGO. It seems a little different to my question. –  Ambo100 Nov 23 '11 at 17:21
    
@Ambo100 the water decals are 'stickers' . It's not a way to print directly (like a printer would). It's a form of stickers. Like sticker sheets you can buy it in plain sheet (white or clear), print your design on it and stick it on your subject. The advantage of the water stickers is that they will conform to the surface (it will look like it's painted on, but it's a sticker) –  pcantin Nov 23 '11 at 17:39
    
I think this question is sufficiently different enough for me to undelete this question. I'm also desperate for an answer. –  Ambo100 Dec 5 '11 at 14:22
    
Some printing shops and specialized sellers like we are can also let you print stickers with them. We use LEGO stickers like materials that are also computer cut. –  Johan Aug 26 '12 at 12:20
add comment

2 Answers 2

up vote 3 down vote accepted

At office/stationary stores such as Office Max or Staples you can get printer friendly sticker paper. The 'AVERY STICKER PROJECT PAPER' comes in clear or white. You can shop around for different finishes. Some are more paper like and other are more like plastic.

From experience this is only good for flat surfaces. To ensure maximum adherence, I recommend to clean the surface with a soft soap. After the surface is dry, rinse it with 99% alcohol and let it air dry. this will remove any remaining oil or dust. You can then apply the sticker to the surface.

You can print you design directly to it and cut it to size using scissors or a craft knife. For complex shapes, you can use a swivel craft knife: enter image description here

share|improve this answer
    
The closest thing I could buy was an A4 Avery sticker sheet with four compartments per sheet. How can I cut out complex shaped stickers? –  Ambo100 Feb 9 '12 at 16:46
1  
For complex shape I use a Swivel Craft Knife (see the picture in the edit). It's really good for details and curves. –  pcantin Feb 9 '12 at 17:01
1  
The hard part was finding the right template. Avery seem to have thousands of templates. I would have preferred to have printed from Photoshop but I ended up using Avery's online service to design my sticker. I was forced to use up all four stickers. –  Ambo100 Feb 9 '12 at 17:44
1  
Here's the final result –  Ambo100 Feb 9 '12 at 18:06
add comment

One important point that the previous answer omits: With the typical "water slide" decal paper, after printing your pattern, generally with an ink-jet printer to get the colors you want, you must waterproof the pattern by spraying several coats of Krylon clear enamel or equivalent and allow it to thoroughly dry before cutting out and trimming the decal and putting it in water to remove the backing paper.

Also, except in unusual applications, you will want to apply the decal to a WHITE brick, not one of the other colors. This is because of the subtractive nature of printing: white is assumed to be the starting color.

share|improve this answer
    
Varnish/Finish is mentioned in the 'previous answer' regarding Water Decals. –  pcantin Dec 19 '11 at 20:17
    
@Bill, This would be a good answer for this question. –  Ambo100 Jan 10 '12 at 9:20
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.