0
votes
0answers
46 views

Parallel Direct Commands to an NXT

Is it possible to send multiple Direct Commands to an NXT brick in a quick succession, and the NXT brick will execute them as soon as it receives them which will look like they are happening in ...
0
votes
1answer
34 views

I can’t run the NXT 1.0 program software on my Mac version 10.6

How do I fix this? I run the install program, restart my computer, go to the “Applications” folder and there is a folder named “LEGO MINDSTORMS NXT”. I open the folder and there are three “options”: a ...
4
votes
2answers
164 views

How can I find the analog output of a color sensor?

Could anyone provide me with an image of the voltage output of an NXT or EV3 colorsensor. I would like to have the analog output if it's possible, and not the digital output.
3
votes
1answer
309 views

Can I open my old NXT program files in the new EV3 software so I don't have to rewrite the entire program?

I would like to use or convert NXT-G 2.0 programs for use with the new EV3 software. Is there an easy way to convert them besides just building them from scratch in the EV3 environment?
5
votes
2answers
659 views

How to program two NXT motors to run at the same time?

I'm working on a project with multiple axis of movement… trying to get two motors to run at the same time in order to achieve a mix of two!
0
votes
1answer
144 views

Are variables always global with NXT?

New to NXT software. What I'm trying to do is get my motor to go one of 5 distances, but I'm not sure how to choose between those actions. What I thought of was setting 5 variables to 5 sensors. The ...
1
vote
1answer
269 views

What are the memory requirements of EV3-G software blocks running on NXT bricks?

The NXT brick has about 130K memory available for user programs. With the newer firmware required for downloading EV3-G programs that memory has been reduced to 118K. How much memory is used by the ...
2
votes
3answers
763 views

What is a normal range of reading of the Light Sensor using EV3 Raw Sensor block?

EV3 software does not support the Light Sensor. It does support the Color Sensor. The solution is to use the Raw Sensor Block. What is "normal" for raw sensor block readings? I'm getting readings ...
2
votes
1answer
163 views

NXT Programming not working

I recently got back into NXT stuff (keep in mind I have a NXT 1.0). My screen was broken,but got that fixed. The software works,but I think the programming doesnt. I made it so If I push a button,the ...
2
votes
1answer
101 views

NXT brick erratic programming behavior

I think I have a defective NXT brick. It has been programmed to move in a direction for 1 second, wait 1 second and then move in the reverse direction for 1 second. The code downloads on another ...
2
votes
0answers
206 views

Ideas for large NXT projects [closed]

I currently have 6 NXT sets. Can anyone think of some large scale projects that I could attempt using most of the NXT bricks and pieces together?
4
votes
2answers
285 views

Ultrasonic problems with the red and blue balls?

I'm still new to NXT, I try to make the robot locate a ball using the ultrasonic sensor, while there I should be in a square area marked by white color. How can I make the robot locate the object (by ...
5
votes
1answer
178 views

Is there a way to change the Lego NXT sensor polling frequency?

I am using LEGO NXT 2.0 with the native NXT flowchart-style programming environment, I would love to be able to poll the sensors more frequently. (In particular, it seems that the light sensor is ...
4
votes
2answers
155 views

Mindstorms start block is missing

the start block is missing on my mindstorms NXT 2.0 programming space. i cannot run any program without it. i have tried, restarting the programming window, placing a block and even just undoing to ...
4
votes
1answer
395 views

What can cause programmed NXT 2.0 motors to misfunction when small resistance is applied?

I have robot built per the Alligator tutorial included with Mindstorms NXT 2.0. Everything works correctly if I hold it off the ground and make sure there is no load on the two leg motors. However, if ...
6
votes
1answer
360 views

How can I power an NXT motor without the NXT brick?

I know almost nothing about robotics, so I was wondering how can I power the nxt motor without using the nxt brick, and how can I send signals to it?
4
votes
1answer
413 views

Program a full rotation of a NXT motor in X seconds

I'm interested in mimicking the functionality of the Arqball Spin, at $60 it isn't cheap so I'd like to make the most out of my Mindstorms parts. I'd like to use NXT-G to program a motor to rotate ...
4
votes
1answer
2k views

Can you program an RCX using the Mindstorms NXT 2.0 software?

I was asked to teach a robotics class and found several RCX bricks in storage. Can I use these bricks with the Mindstorms NXT 2.0 software? If not, what would be the software I would need to use the ...
4
votes
1answer
2k views

How to control a RCX from a Mindstorms NXT

I have both an RCX and an NXT. I would like to control the RCX brick from the NXT (and possibly communicate back to to the NXT from the RCX). I would like to avoid purchasing the Mindsensors RCX to ...
7
votes
1answer
242 views

NXC Saturation algorithm for limiting motors?

What is a good algorithm in NXC for control saturation? I want to make sure my motors don't turn past a certain angle, or they will break the model. I could do something like: if (angle > 45) ...
5
votes
0answers
191 views

PosRegEnable - How to change motor parameters?

I want to set PID parameters for a faster 'attack' when using PosRegEnablePID() on a motor. I am compiling with nbc/nxc 1.2.1 r4 mac osx fatbinary using -Z2 and -EF flags. But the compiler says: # ...
5
votes
1answer
422 views

NXT brick output ports not working properly

My NXT brick will not let motors run. When I download a program the motor will move forward and backward and then stop - sort of a wiggle. Another motor will not work at all. This happens for all ...
5
votes
1answer
210 views

NXT motor power accuracy

When turning the motors, how precise is the speed parameter? I am programming in the NXC language (standard firmware) and wishing to know how many decimal points will be taken, if any, and whether the ...
5
votes
1answer
274 views

Is it possible to display large text on an NXT using LabVIEW?

In RoboLab and using RobotC, it's possible to write LARGE text to the screen of the NXT. In RoboLab, this can be done by just typing [\big] at the beginning of a string constant which is wired into a ...
8
votes
4answers
2k views

Can I control 2 NXT bricks from a computer using bluetooth at the same time?

I am thinking about starting a project involving controlling the movement of a mindstorms robot depending on some input from a Kinect device; however the robot will require at least 6 motors. I have ...
4
votes
1answer
2k views

Mindstorms 2.0 can't download to NXT brick with error 142023

Using Mindstorms education 2.0 on a Windows 7 computer I can't seem to get the program to see the NXT via USB or bluetooth dongle. When connected by USB nothing appears in the NXT window with device ...
16
votes
4answers
5k views

How to calibrate NXT motors to travel the same distance?

The motors included with the NXT are not all created equal - when given the same input power level, they do not always go the same distance or turn at the same rate. I measured this by creating a ...
7
votes
2answers
928 views

Can we program Nxt2 in C++ under Visual studio 2010?

I'd like to know if it is possible to develop C++ software for NXT2 using Visual Studio 2010 as IDE. I know there are small online projects for NXT but I can't find nothing about NXT2.... Any ...
7
votes
4answers
2k views

How to make Mindstorms respond differently, depending on which sensor is triggered?

I am new to Mindstorms (but in my day job I am a programmer). I want to make my robot do one thing if the touch sensor on port 1 is pressed, and do something different if the touch sensor on port 2 ...
8
votes
2answers
393 views

Why does this program work in LabView when targeted to computer but not to NXT?

I have a program written in Labview for my LEGO Mindstorms NXT 2.0. When the target is set to the computer, the program works just fine. However, when I set the target to the NXT, the program doesn't ...
30
votes
6answers
14k views

Is there any other way to program the Lego Mindstorms NXT other than the provided software?

I'm curious to know if there is any way to program the NXT other than the provided software. I don't necessarily have any issue with the software. Does the program created by the software translate ...