A more advanced form of LEGO®, allowing for the creation of more realistic working parts.

learn more… | top users | synonyms (1)

2
votes
1answer
131 views

How can I make a precise one-way clutch using Technic elements?

I need a mechanism so that if a (NXT) motor rotates forward, it moves one gear, but the other stays still, but if it rotates backward, the first gear does not move, but the second one does. I found ...
7
votes
3answers
5k views

How to speed up the 4x4 Crawler truck 9398?

Just finished building the 4x4 Crawler and it was a fun build but as a remote control car it is . . . in a word . . . SLOW! I know it's powerful and can climb over stuff but sometimes there is nothing ...
5
votes
2answers
164 views

Is it possible to create a differential if I don't have it as a ready to use element?

I have numerous gears, axis and other elements from different Lego Technic sets. I wonder if using them I can make a kind of a differential like this? If not, how can I implement similar ...
4
votes
1answer
128 views

Need help fudging a group in 8039

So, I'm building "8039 Venator-class Republic Attack Cruiser ™ Star Wars TM" and I've hit a snag. I need help fudging the instruction from page 76 of book 1 for that set (see picture below). I'm ...
6
votes
3answers
2k views

Which LEGO Technic sets include instructions to add the Power Functions accessory box?

Some LEGO Technic sets apparently come with instructions to add a motor, using the pieces from the Power Function Accessory Box (set 8293). Is there a list of the sets which do contain such ...
3
votes
2answers
120 views

Identify these (Technic Steering) parts?

These three parts do not have part numbers on them, but it is clear they are LEGO parts (they have LEGO printed on them). I am trying to track down the set that these belong to, or at least a part ...
0
votes
0answers
36 views

Can Mindstorms EV3 communicate using protocol 802.15.4?

My aim is to make the robot communicate using protocol 802.15.4 through a USB dongle 802.15.4 over 6LoWPAN. The robot has to be able to get information from TelosB. I wonder whether this possibility ...
3
votes
2answers
430 views

What other uses are there for pull-back motors?

Sets 42010 and 42011 feature a pull-back motor. They have a very high torque for a very small numbers of turns, they then free-wheel. I'm trying to find alternate usage for them. That is anything but ...
1
vote
1answer
176 views

When and why were pieces 3651 and 3652 discontinued?

Bricklink has piece 3651 as Axle and Pin Connector, while piece 3652 is Engine Piston Square 2x2. You could attach them to each other to form a piston. Service pack 5260, Connecting Rods and Stop ...
11
votes
2answers
1k views

When did LEGO stop producing Technic action figures?

I recently got interested in LEGO Technic again. The last set I own is maybe 15 years old, so my knowledge is a little bit outdated. Back then some of the Technic sets had action figures included, ...
16
votes
3answers
2k views

When did Lego decide that it was okay to put a stud into a technic hole?

At one point, Lego didn't really support putting a stud into a Technic hole, stating that it caused too much stress on the bricks. And for a while, there were no sets where that's the case. However, ...
1
vote
2answers
132 views

Where can I find LEGO Digital Designer projects for Lego Technic MOCs?

I have LEGO Technic pieces collected from multiple sets and would like to find projects on the web which I can view and build models step by step. Please advise sources where I can find these.
2
votes
1answer
250 views

Please identify this broken LEGO Technic piece

This piece is from LEGO Technic 8070 Super Car. Can anyone please identify its name as it's broken and I need to get a new one. Thank you!
3
votes
2answers
209 views

How make a 6x6 board rotate using LEGO technic parts?

Are there any common patterns for making a 6x6 (or bigger) LEGO board have a ability to rotate using technic with gears and such? Has to be without the help of the existing 2x2 lego part that rotates, ...
0
votes
1answer
401 views

How do I get instructions to fully motorize Technic 42006

I have just purchased the Technic 42006 and would like to make it fully remote controlled.
6
votes
4answers
2k views

Lego Digital Designer Alternatives

I am been using LDD (Lego Digital Designer) for my latest NXT project and noticed a major delay in building and making instructions for my Projects (My Mindstorm projects contain well over 500 pieces) ...
5
votes
1answer
149 views

Alternative for Technic, Gear Rack 1 x 7 with Axle and Pin Holes?

We are trying to build a MOC which requires Technic, Gear Rack 1 x 7 with Axle and Pin Holes and we don't have that. Could we build it? Or are there any alternatives? FYI we do have Technic Gear ...
8
votes
1answer
498 views

Will Lego repair a bad motor?

I have the Electric Technic Micromotor: http://www.peeron.com/inv/sets/5119-1 and it simply won't come on. I seem to recall at some point someone telling me a long time ago, that if you sent parts ...
2
votes
1answer
157 views

Pre-Technic gears?

I have this set of lego gears. I remember seeing them first at my grandparents in the mid 80's. They predate my firsts Technic sets (~84 or 85). I have fond memories of my dad building a 3-speed ...
5
votes
1answer
367 views

How to improve the range of an IR receiver?

I am creating a new Truck which contains two IR receivers in the front hood. With my testing I get a range of about 6 feet (I have also noticed the small Technic motors on the IR receiver are slow ...
4
votes
1answer
316 views

How should I connect two LEGO cylinders with pistons to measure the movement caused by sea waves?

As part of a school project I need to make a model of a snake electricity generator. I would like to build this with LEGO elements, and for that, I need to measure the movements of the cylinders ...
1
vote
0answers
121 views

Linear Actuator of the boom of 42006 jams

I just built a 42006 excavator, and the Linear Actuator jams, can not be rotated. I think the too sharp angle of the u-joint at the top of the boom is the reason. Is there a workaroud?
2
votes
1answer
257 views

Getting started with Mindstorms and/or Technic

I'm looking into getting started with LEGO. Can you briefly describe the difference between Technic and Mindstorms? I've read that the parts and compatible, so I suppose it's the functions that ...
6
votes
2answers
701 views

How to Make a Lego Claw Arm?

I am trying to build a lego claw arm to pick up stuff that is out of my reach and I need some ideas on how to design it. I would like a mechanism to be able to open and close the claw from the ...
5
votes
1answer
353 views

What are the torque limits of gears?

I am using Lego in the classroom to introduce students to geared machines. As part of this I am asking them to design a winch, using a small 1.5V DC motor and a collection of the common Lego gears, ...
10
votes
5answers
4k views

What are the largest Technic-compatible tires on the market?

I am looking for the largest LEGO wheels with tires available to build a nice-sized RC LEGO car. Of course I will start with the simplest prototype, but I would like to achieve a design which will ...
1
vote
1answer
1k views

List of Lego Technic sets with remote controller?

I am interested in buying a set with motors (etc) with a remote controller. Is there a website that allows to search with this conditions? Official website is pretty bad. I have found the Lego ...
8
votes
2answers
617 views

Is there an easier way of threading Technic pins into other elements?

I've been using Lego Digital Designer to recreate a few models I've built in real life. One model in particular uses many Technic axles which need to be inserted fully into other Technic bricks (like ...
3
votes
2answers
187 views

What is the difference between 8T gears “Type 1” (3647) and “Type 2” (10928)?

On Bricklink I can see that there are two types of 8-toothed gear - a "Type 1" (3647) and a "Type 2" (10928). It's obvious these parts are not the same, but what is the functional difference ...
4
votes
1answer
201 views

How to build a car that stops at a certain distance?

I want to build a small car that is about 200 grams. I want it to run the following course and stop at exactly or about the the finish line. I can't use any controlling devices or electronics. I've ...
4
votes
2answers
487 views

Pattern for vertical motion using technic lego

I have a motor and some other components that move a machine vertical on the ground. Inside the machine i need to raise a part by 5 cm, up and down. Are there some common patterns that can move ...
0
votes
0answers
38 views

Can a helicopter be built out of LEGOs using normal LEGO motors? [duplicate]

Are there any LEGO motors that are able to lift their own weight when attached to a rotor blade? In other words, with a sufficient number of motors attached to rotors, could a LEGO machine take off ...
6
votes
2answers
226 views

How can I remove a rubber band from a pulley?

We have a pulley and a bunch of rubber bands: We don't know that part numbers, but they all were part of a Mindstorms (RCX 2.0) set. My son was trying use the pulley and band to transfer power to ...
4
votes
3answers
360 views

Is there a Technic set that is just an assortment of parts and not a specific vehicle?

Can I buy Technic sets that are just assortments of parts as opposed to a specific vehicle? Background I do research on sediment carbon cycling in lakes and I need use a rotating array of magnets to ...
4
votes
1answer
343 views

Buying another kit instead of 8293-1: Motor Set?

I want to get some motors but don't know if it is a better idea to buy 8293-1: Motor Set or try obtain motors from some other sets. Is there any kit challenging 8293?
1
vote
1answer
446 views

How to build a flywheel crankshaft piston pattern with technic?

I'm not sure of the name of the pattern, feel free to edit title if you have a better name for the pattern commonly used in engines. I was just wondering if anyone has built this specific pattern in ...
6
votes
2answers
280 views

What part(s) can I use to connect technic liftarms at a 90 degree angle?

Is there a way to connect the two beams in this angle and still keep the connection strong and keep the rotation the same?
7
votes
2answers
5k views

Which sets currently contain pneumatic LEGO equipment?

When I was younger my dad bought me 5218-1, a technic-based pneumatics set, which, combined with the old motor system to provide a mini compressor system created quite a bit of entertainment and it ...
4
votes
2answers
260 views

Technic 8071 assembly problem

I am busy attempting to assemble Technic 8071, and have encountered a problem. On page 83 of the first manual, a yellow gear (4203493) together with a grey splined rod (4211815) is added to the ...
6
votes
2answers
947 views

Exact dimensions of studless Technic beams

I'm looking for the exact dimensions of the studless Technic beams. I found a number of answers for studded beams but there are some more aspects for the studless beams which are not covered. I'm ...
7
votes
3answers
1k views

How to make a conveyor belt with LEGO parts?

I am making a small robot with an Arduino and Technic LEGO powered by stepper motors. I am planning on moving small rocks throughout my machine. Does anyone have an idea of what kind of Technic LEGO ...
1
vote
1answer
1k views

What are the size of Lego Technic Parts?

I'm creating a LEGO Mindstorms catalogue for a school project. I measured the LEGO parts and I made an average size. My goal is to create new parts with a Rapid prototyping machine and I wanted to ...
7
votes
2answers
894 views

How to start with technic?

I have bought myself the technic set 9393 Tractor. I really like the model and I want to dig deeper into the Lego technic universe. I am not focused in building pre-designed models (although I enjoy ...
13
votes
2answers
2k views

Why does LEGO now use studless technic designs?

It seems to me that sometime between 1998 and 2006 (between the Mindstorms RCX and NXT), LEGO switched from using studded technic bricks (like this:) to studdless beams (like this): In my ...
8
votes
1answer
652 views

What are the angles used in angle connectors and liftarms?

LEGO makes Technic Angle Connectors, like these: (Here are names and part numbers). They also make angular liftarms, like these: (part 32348). That last part has an angle of 53.5 degrees. ...
1
vote
1answer
190 views

What are the possible differences between LEGO elements?

I'm in a technical school in the Netherlands and we received the following questions for an assignment: What are the other possible differences between LEGO elements? What are the different forms of ...
11
votes
3answers
466 views

Is there a way to remotely operate the push-button light brick?

The push-button light brick seems to be popular with Lego at the moment, and included in quite a few sets. I'd like to find a way of being able to operate it remotely, so that I can include the ...
7
votes
1answer
271 views

Mechanical auto-unblocking mechanism

I have a GBC module1 which is quite simple but blocks regularly because a ball happens to be at just the wrong place at the wrong moment. Per se, it's not a problem as a Technic Gear 24 Tooth Clutch ...
8
votes
1answer
3k views

Is a N2 or CO2 paintball tank a viable power source for a LEGO pneumatic Engine?

I would like to know how a LEGO pneumatic engine would perform when powered with a nitro (N2, HPA) or CO2 tank. I have seen a few RC cars powered with air (from soda bottles), so I am wondering if it ...
7
votes
2answers
971 views

Homemade methods for interfacing a Servo with LEGO bricks

I'm looking for non-destructive way to structurally attach a standard servo with LEGO bricks. I'm interested in answers for either Large, Medium or Small size servos. I'm using LEGO ...