1
vote
1answer
247 views

What are the possible differences between LEGO elements? [closed]

I'm in a technical school in the Netherlands and we received the following questions for an assignment: What are the other possible differences between LEGO elements? What are the different forms of ...
1
vote
1answer
101 views

What is the name of this almost triangular shaped Technic beam?

Okay so, I've been on BrickOwl.com for the past day or two, trying to find the names of the peices for a LEGO GLaDOS that this guy made because he doesn't give the names, at around 12:50 he uses this ...
1
vote
1answer
76 views

Where can I find the misspelled Luke Skywlaker pen?

There was a LEGO Star Wars snafu in which a buildable pen was released, and "Skywalker" was incorrectly spelled as "Skywlaker". This was quickly remedied, and a corrected version was released. I ...
1
vote
1answer
46 views

EV3 Installation failure on OSX El Capitan 10.11.3

Hi This is the first time I've tried to use EV3 software since upgrading to El Capitan. Before then, it worked perfectly. When I tried to launch the application a message pops up saying it has ...
1
vote
1answer
79 views

How many pneumatic actuators does one air tank support

For example, I want to use air tanks to supply pressure to up to 18 pneumatic actuators (19475c01), but I don't know how many air tanks I should buy to supply the air pressure required by all of them. ...
1
vote
1answer
52 views

How can I get a replacement of LEGO NXT Green City Challenge Activity Pack CD-Rom?

I purchased the LEGO Mindstorms NXT Green City Challenge Pack on LEGO many years ago. Now, I wanted to use back this challenge pack, but I found that I've lost the CD Rom and the class that I am using ...
1
vote
1answer
40 views

Interface between keyboard and NXT mindstorm

I want to make an NXT program that handles key presses from a user. First, I'd like a message to display asking the user to choose a key on the keyboard (S or M), and then depending on the chosen key ...
1
vote
1answer
48 views

EV3 software crashes on Windows 8 laptop

My cousin has Windows 8 x64 netbook laptop. When he tries to start the application he gets .NET framework error and I can see following text in the log file: +000,016 >> MINDSTORMS EV3 launched ...
1
vote
1answer
76 views

Direct/system command for reading the display buffer of EV3 bricks?

I recall being able to read in the display buffer of NXT 2.0 bricks over Bluetooth/USB by issuing Read IO Map system commands. I've looked through the bytecodes and communication documentation for the ...
1
vote
1answer
94 views

How to fix the Gyro

Currently the gyro sensor connected to the EV3 brick doesn't really work. whenever the gyro is attempted to be used the robot will just sit and spin once it gets to where it needs to use the gyro. Any ...
1
vote
1answer
48 views

8034 softwer RIS 2.0 - how to work it under ubuntu 14.04?

can I get to work RCX2.0 softwer RIS2.0 under ubuntu 14.04? I've installed it under wine, but the graphics of my notebook was to high for it, and the next phase of installation - the looking for the ...
1
vote
1answer
39 views

NXT Display is messed up

I have an NXT 1.0 and the LCD display only displays noise. Anyone know how to get one replaced or repaired? Thanks
1
vote
1answer
82 views

Downloading error code 0 for ev3 programs

When I download some programs to my ev3, the application gives me an error as shown below. Error downloading Projects/SUP3RCAR/ResetSteer.rbf during deployment. Error code:0 Can somebody tell me why ...
1
vote
1answer
85 views

Site or example project / downloadable programme resource anywhere for the EV3 mindstorm?

There seems to be lots of available examples for the NXC version, but I can't find anything for the EV3. I thought that there would be a load of example project files with the software but there's ...
1
vote
1answer
97 views

EV3 ide flickering

I'm using the Mindstorms IDE for EV3 on OSX. Everytime I'm moving the cursor the screen starts to flicker. See https://www.youtube.com/watch?v=q3JkonowmD0&feature=youtu.be . Any ideas what's ...
1
vote
1answer
84 views

Is there a way to buy a customized minifig?

I have a design I want to replicate into a minifig. I also want to add additional accessories to it (i.e. a calculator and glass beaker). Is there a place I can order online to get this done? Is there ...
1
vote
1answer
170 views

“file error!” appears on nxt why?

I tried to upload this program to my NXT, but for some reason I am not able to run it properly as it terminated with the message file error!. No idea why. I am trying to read a .txt file into a char ...
1
vote
1answer
131 views

I have a series 14 Sasquatch (Square Foot) missing facial paint, is it normal?

Hi I have the camera holding Sasquatch but he does not have the black eyebrows and muzzle. The eyes and teeth are there but the rest is just brown.
1
vote
1answer
195 views

How much do you think these Lego's are worth?

I've got some very old LEGO brick from the 50's, and am wondering how much they are worth. I'd like an estimate because I know that they are now collectors items that might be worth something. Here ...
1
vote
1answer
163 views

EV3 SPIK3R Mission 5 Just keeps backing up

I completely built the Mindstorms EV3 Spik3r. Missions 1-4 worked fine. However, with mission 5, and using the pre-made program, the robot just keeps backing up, instead of facing the bug, shooting it ...
1
vote
1answer
220 views

pc program to receive data from EV3 via usb/bluetooth

I'm looking for a library to create a desktop program. It should receive a data from EV3 brick programmed by standard EV3 software. Currently I consider 2 approaches: 1. EV3 brick sends a bluetooth ...
1
vote
1answer
103 views

Education EV3 Software Site Licence - installation on teachers computers?

WE've recently purchased some mindstorms ev3 education sets plus the site licence of the Software. in Switzerland many teachers do their preparations at home, so my question is, am I allowed to ...
1
vote
2answers
47 views

EV3 - At what time DIRECT_REPLY is sent by brick?

For example: I've sent DIRECT_COMMAND_REPLY to rotate the motor for 720 deg. When EV3 brick should send reply: before motor finished rotation (right after my command was received) or after motor ...
1
vote
1answer
93 views

Which set includes a large white mask

I bought a sealed bag at Goodwill but It did not include any information on what set it is from. Pieces look like large white body plates, skeletal/Stormtrooper mask and tusks.
1
vote
1answer
234 views

Where can I get a large number of LEGO bricks cheap? [duplicate]

Yes, I see other people's amazing MOC's all the time, and think, "man, I could totally do that if I had enough bricks." The problem is, I don't really know where to look for a whole bunch of LEGO ...
1
vote
2answers
98 views

Which program do I use to program my rcx 1.0 or 1.5

I am getting an RCX and I know it is ether a 1.0 or a 1.5. Which program do I use to program my RCX?
1
vote
1answer
146 views

EV3 IR, ultrasonic senosor datasheets

I want to connect EV3 IR and ultrasonic sensors to my Arduino. Unfortunately could not find any good documents describing how to use/control them. Could you please help? Thank you very much.
1
vote
1answer
139 views

How to enter wifi-password on ev3dev?

After successfully installing ev3dev and getting the USB connection working I now want to get my wifi-dongle working (or rather connecting). The dongle is successfully found and my LAN is displayed. ...
1
vote
1answer
84 views

How would I make a decal for a 2x2 dome brick or a 2x2 round slope brick?

I am looking to make a decal for a custom droid using either the R5-series head or the regular dome R2/R3/R6/R7/R8 head. However, I do not know the process for creating droids. Does anybody know how?
1
vote
1answer
51 views

What does 191767 mean in “Paper, Cardboard for Set 4336 #1, Scala Cat (191767)”

In BL http://www.bricklink.com/catalogItem.asp?P=4336cdb01 This cardboard's name is "Paper, Cardboard for Set 4336 #1, Scala Cat (191767)" What does "(191767)" mean here in the description?
1
vote
1answer
254 views

Mindstorm EV3 no longer recognises SD card

I followed the instructions to install leJOS on an SD card, to get Java support for the Mindstorms EV3 brio. The brick detected the leJOS files and processed the whole installation procedure ...
1
vote
1answer
2k views

Programming EV3 with NXC

I'm trying to run NXC programs (all run well on NXT) but when trying run it on EV3 I find an error. The download from computer to EV3, runs well but trying to run the program with RUN EV3, I have an ...
1
vote
1answer
77 views

Not detecting motor port D

We are trying to program in LabVIEW, using all 4 motor ports. On the port selector, port D is not even showing up.
1
vote
1answer
404 views

Dimensions for EV3pieces

I need to know the dimensions of the EV3 pieces for a school project (in mm). Does anyone know?
1
vote
1answer
225 views

Trouble with Commander app: Using buttons to control motors

I'm having trouble with the Commander app for Android. I've put an EV3 into set 8448. I'm using one of the large motors for propulsion and a medium motor for rack and pinion steering. I don't have the ...
1
vote
1answer
307 views

Lego EV3 - sending direct commands over RFCOMM Channel (Objective-C, Xcode)

I successfully open RFCOMM Channel to Lego EV3 brick with code: IOBluetoothDevice *device = [IOBluetoothDevice deviceWithAddressString:@"xxxxxxxxxxxx"]; IOBluetoothRFCOMMChannel *rfCommChannel; ...
1
vote
1answer
144 views

Is it possible to use a LEGO NXT ultrasonic sensor for a LEGO train crossing?

I was looking at LEGO NXT components, and I found the ultrasonic sensor. I was wondering that if I put off to the side of the track, the nose of my train would activate the sensor, thus operating the ...
1
vote
1answer
451 views

Why I get this “message unable to compile some documents for deployment ev3”?

I have a LEGO Mindstorms EV3 program that I was working on for a long time but recently and suddenly when I try to download the program the software displays the following message: "unable to ...
1
vote
1answer
514 views

EV3 bluetooth controller for mac

Is there a suitable EV3 controller for mac? It should be a compatible alternative from the official EV3 controller in the iOS app store or google play.
1
vote
2answers
744 views

How to install NXT Firmware 1.28?

Lego is giving 1.31 from their website but I need 1.28, how can I install it?
1
vote
1answer
83 views

How can I make product suggestions to TLG?

I'm sure lots of is have had ideas for products, parts, sets, themes or services that we'd like LEGO to produce. What are the best ways of proposing them to TLG, and of persuading them to take on our ...
1
vote
1answer
143 views

Link 1 x 6 with Stoppers Part 2739b

Will Link 1 X 6 connect to Liftarm 2 Axle Holes and Pin / Crank (Part 33299)? The Link will be attached to a coke can, that needs to drive a crankshaft. 2739b from Peeron 33299 from Peeron
1
vote
2answers
251 views

Robot that searches for lights

I use Lego Mindstorms NXT 2.0. I want to schedule my robot to move to where there is light αnd then when it finds it (a large amount of light, for example 80%) to stop and move another motor for 30 ...
1
vote
1answer
386 views

Programming with Lego Mindstorms EV3

I know this question was asked in the past, but I want an up-to-date answer. What is the best way to program with the NXT with a oriented object programming language? Ideally C#, C++ or Java (maybe ...
1
vote
1answer
175 views

Can Mindstorms EV3 communicate using protocol 802.15.4?

My aim is to make the robot communicate using protocol 802.15.4 through a USB dongle 802.15.4 over 6LoWPAN. The robot has to be able to get information from TelosB. I wonder whether this possibility ...
1
vote
1answer
220 views

How do I Build a LEGO Digestive System? [closed]

How might I build a LEGO model of a digestive system? I think it could be a good way of helping my son with a science project. Either building plans, instructions, or any help with getting started ...
1
vote
1answer
325 views

EV3 Event Delegation

My problem is that the robot, which should just remain in the program until the Escape Button is pressed, just stays in the while-loop. The current code looks like this: using System; using ...
1
vote
1answer
714 views

“The type or namespace name ”Brick“ could not be found” Xamarin Studio with MonoBrick

I managed to establish a wifi connection with the Ev3 Brick via WinSCD and am programming the Ev3 with XamarinStudio/Mono Develop(http://xamarin.com/studio "XamarinStudio"). My problem is that "The ...
1
vote
1answer
659 views

Price of EV3 education software

After looking around on the Lego Education website, I failed to find the price of the education software. I currently have the retail version of the software, but I want the extra features and blocks ...
1
vote
1answer
362 views

ERROR CODE 7- Cannot download needed file for the program

I am kind of new in LEGO MINDSTORMS, I tried to download a program to the NXT robot and got the Error code 7- "Cannot download needed file for the program" - can someone tell me what should i do?

15 30 50 per page