meta user
network profile
|
Dec 1 |
asked | What is LUGBULK? |
|
Dec 1 |
asked | Does the basic 2 x 4 brick have a common nickname? |
|
Nov 30 |
revised |
What pieces are prone to breaking? Added a couple of other pieces. |
|
Nov 29 |
answered | Are there any mirrored LEGO bricks? |
|
Nov 29 |
accepted | What is the smallest LEGO component? |
|
Nov 29 |
answered | What is the smallest LEGO component? |
|
Nov 29 |
comment |
What is the smallest LEGO component? I've physically compared a screwdriver to a lever. For the purposes of fitting through holes, the screwdriver is indeed slightly narrower than the base of the lever handle. |
|
Nov 28 |
comment |
How can I fix a flattened gear? +1 for the info on plasticity. Of course, I'm horrified at the idea of sacrificing a perfectly good axle (especially when replacement gears so easy / inexpensive to obtain), but the logic behind your suggestions is irrefutable. |
|
Nov 28 |
revised |
How can I fix a flattened gear? Added comment about using broken gear. |
|
Nov 28 |
asked | What is the smallest LEGO component? |
|
Nov 28 |
answered | How can I fix a flattened gear? |
|
Nov 28 |
answered | Does anyone have any successful techniques in searching for lego bricks in a pile? |
|
Nov 28 |
comment |
How to make a 1 ldu offset? From my experiments, I found that a 1 ldu offset is perfect for holding a piece of thick paper. So it does have its uses. |
|
Nov 28 |
comment |
How to make a 1 ldu offset? @Joubarc: That's truly brilliant! Many thanks for the posing this entertaining little puzzle. It's been bothering me for days. Now I'm kicking myself. The first time I ever came across SNOT it used these very same fences! |
|
Nov 26 |
revised |
Are Samsonite gears compatible with modern Technic gears? added 774 characters in body |
|
Nov 26 |
comment |
Are Samsonite gears compatible with modern Technic gears? @Ambo100: See my answer, below. |
|
Nov 26 |
answered | Are Samsonite gears compatible with modern Technic gears? |
|
Nov 25 |
comment |
Are Samsonite gears compatible with modern Technic gears? As @starblue says, there were actually 2 types of gears made in the 1970s. This page provides more info: miniland.nl/Historie/legoautos/samsonite/… |
|
Nov 25 |
comment |
Are Samsonite gears compatible with modern Technic gears? The red gear on the left is not a Samsonite gear. It is a European gear from the 1970s. This was different from the Samsonite ones (and incompatible with them). |
|
Nov 24 |
comment |
How to make a 1 ldu offset? Perhaps we could use the fact that bricks are not exactly 20 ldu wide: they are actually 0.25 ldu short at each end (which means that an ordinary lego wall has gaps of 0.5 ldu between the bricks)? Or that the studs on system bricks are approximately 0.25 ldu lower thatn the holes on technic bricks? |
