14

In the book 1 directions for the 2020 Diagon Alley set (see pp. 43ff), I've run into the following issue:

In building the back of Ollivander's shop, we seem to be building some type of shelving unit:

enter image description here

Notice that the pieces just added stick out from the back a bit.

But later, the directions state to place the back of this shelving unit flush with an already-built wall:

enter image description here

This isn't confusion regarding perspective; later we see that we are to connect this shelving unit with the wall:

enter image description here

But how are we supposed to make this shelving unit flush with the wall if there are parts that stick out of the back of the shelving unit? Note that the wall is a single solid piece with no holes for these parts to stick into.

I've considered moving Ollivander's desk so that I can move this shelving unit forward (to the left), but this then prevents connecting the structural beam from the staircase to the wall (see step 108 in the directions; my image is too large to share). Moving his desk also prevents the staircase from rotating into the shop.

Am I missing something, or is this indeed an error? If it is an error, how have others solved this issue?

Note that we can't just move those pieces in the shelving unit so that they don't stick out; doing so prevents us from building the shelving unit, because the nubs on top of those "sticking-out" bricks gets in the way of the shelves snapping into place. Neither can be omit these pieces and slide them in later, because the nub from the pieces beneath them get in the way.

24

The wall behind the shelving unit is not a standard wall built with regular LEGO bricks, but a panel, which is hollow on one side.

The parts that are sticking out at the back of the bookshelf are accommodated by the hollow of the panel.

My guess is that you attached the panel backwards with the flat side facing in, instead of out. Look at Page 37/Step 48 where the panel is attached. The hollow part should be facing in.

| improve this answer | |
  • 5
    Oh my gosh, what a fool I am. I guess I've learned my lesson: I need to supervise any helpers that are new to LEGO! – Richard Oct 15 at 20:13
  • 1
    Sad that I guessed something like that based on the "hollow" studs shown in the illustration. I was wondering if it swung out like a secret door or something. – Aaron D. Marasco Oct 15 at 20:19
  • 1
    @Richard, don't feel bad. We all make mistakes like that. Sometimes it's from being tired or distracted, or as you said, someone else helping who is less experienced. It's normal. I'm glad I could solve the mystery for you. Happy building! :) – TheBrickBlogger Oct 16 at 13:57
  • To be fair, Lego instruction manuals quite often have errors such as missing parts, mis-aligned parts, and so forth, so it's not unheard of. I speak mostly from Technic sets, where it's rare that they are perfect. (I'm not complaining, just stating.) – Eilon Oct 16 at 17:29
  • 2
    @Eilon yes, errors tend to happen, but isn't an often occurance. – Alex Oct 17 at 5:20

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.