I'm curious about this motor (68488):

6305270 SPIKE Essential Motor

This motor looks very small. What is inside this motor? How does it compare to the other Powered Up motors?

1 Answer 1


As far as I know, this is the smallest motor LEGO has produced since the micro motor in 1993:

Micro Motor

This new angular motor is not quite that small, but it is smaller than every other motor currently in production. Here's how it looks on the outside:

External view

The basic structure is nearly identical to the medium angular motor shown below except that this motor is shorter. The important connections around the drive are identical. Neither motor allows the drive axle to pass through the entire housing.

Medium Angular Motor

We can pop the back off the motor easily enough by depressing the 4 tabs holding it in place and/or prying the housing out slightly. This reveals the printed circuit board and back for the gearbox:

Back cover removed

The blue section of the housing is then easily removed:

Blue cover removed

The gearbox can then be removed from the drive shaft and front of the motor to reveal the main drive gear:

Main drive gear

The gear and metallic axle can be easily removed from the housing. The gear provides the main connection for the drive, while the metallic axle is used to transfer rotation through the gearbox to the magnet located on the other side.

Main gear disassembled

Now we can return to the gearbox with the PCB attached:

Gearbox and PCB

The PCB can be gently popped off of the gearbox:

PCB top

PCB bottom

The electronics are very similar to those found in other Powered Up motors that include rotation sensing. There is a motor driver, controller, and Hall effect sensor included to monitor the drive angle.

We can remove 6 screws from the gearbox, remove the cover, and put the gears all back where they belong to see how the magnet on the top of the gearbox connects in order to interact with the electronics and act as a rotation sensor.

Note that this motor and gearbox are much smaller than those included in other common LEGO motors. I've included a 1x1 round plate for scale.

Gearbox internals

Four gears can be removed from the gearbox to reveal a significant gear reduction:


The DC motor can also be removed easily enough in case there is ever a need to repair or replace it:

Motor with 1x1 round plate for scale

TLG provides technical specs for this small angular motor:

Voltage Range

  • Min: 3.3 V
  • Max: 6 V

No Load

  • Torque: 0 Ncm
  • Speed: 110 RPM +/- 15%
  • Current consumption: 55 mA +/- 15%

Maximum Efficiency

  • Torque: 1.8 Ncm
  • Speed: 85 RPM +/- 15%
  • Current consumption: 170 mA +/- 15%


  • Torque: 5 Ncm
  • Speed: 0 RPM
  • Current consumption: 340 mA +/- 15%

This is much weaker than most other motors. For example, the stall torque of 5 Ncm is much less than the rated 18 Ncm for the medium angular motor.

This isn't the most powerful motor, but it is handy for lighter workloads where space is limited. The inclusion of full rotation control also makes it a good fit for spaces where a servo motor might be useful, such as steering on vehicles.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.