I want to recreate a few things I saw but I don't know what pieces I need. Can you identify these bricks so I can buy them on Bricklink?
Add a comment
|
1 Answer
Most of the bricks seen there are fairly common - plates, tiles, round bricks (2x2, 1x1 and cone 1x1).
Among the "uncommon" parts I can tell:
- Technic thick liftarm, 2-long in blue.
- Round 1x1 plate with swirl, in silver.
- 1x2 plate with perpendicular technic pin on top, in white.
- I can't tell exactly how the 6-stud-long round parts of the scroll are done, but I suspect some clever SNOT plus something like 1x2x1 curved slope in white.
- Barb/Claw/Horn/Tooth (small) in either silver or pearl grey.
- Bar 4L in reddish brown.
The SNOT in the scroll is particularly tricky - the correct alignment between a curved slope and the 2x2 round bricks cannot be achieved with the usual parts used for SNOT, as far as I can tell (bricks with stud on side, etc).
For that SNOT assembly, I'll suggest using 1x1 plate with bar handle on long stem together with 1x1 plate with horizontal clip plus a few plates, like so:
As for the stickers, they seem custom-made.
-
-
1See bricks.stackexchange.com/questions/61/what-is-snot-building Commented Aug 22, 2022 at 20:39
-
I got some Technic thick liftarm, 2-long in blue and Round 1x1 plate with swirl, in silver and some Bar 4L in reddish brown. I tried putting it all together and the bars are too small to hold it all together...they fall out of the Round plates and liftarms. Commented Aug 26, 2022 at 20:48
-
Unfortunately I cannot know how it is held internally. Maybe they're held by non-lego means, such as plasticine or clay. Commented Aug 26, 2022 at 22:32
-