7

I am searching for a part like LEGO 48989, but without the 4 pins.

enter image description here

The manufacturer doesn't matter as long as the part is compatible with LEGO bricks. Also, a combination of parts is ok if it has the same function and no overlapping parts.

The construction problem:

  • the upper holes will hold pins with friction ridges (3L or normal)
  • the sideways hole will hold a pin with friction ridges (3L or normal)
3

2 Answers 2

10

Your updated question mentions axle holes are not an option for your needs, and just pin holes are allowed. There's no LEGO part (I know of) with that exact topology, nor do I see a way of combining parts to achieve the desired topology within a 3L size restriction.

If none of the below suggestions suit your exact needs, and assuming cutting off the pins of a 48989 part is not an option, then non-LEGO parts are your only option it seems. I'll have to defer to someone else in that case. I'll leave this answer up, since it might provide inspiration.

LEGO Technic connectors with 90 degree offset holes, limited to 3L size (but with axle holes)

The closest is probably Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole, albeit with axle holes rather than pin holes :

enter image description here

There exist similar parts as well, like eg. Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes :

enter image description here

Or the smaller Technic, Axle and Pin Connector Perpendicular :

enter image description here

LEGO Technic connectors with 90 degree offset holes, with just pin holes (but exceeding 3L size)

There are some parts that have just pin holes, offset by 90 degrees, like Technic, Pin Connector Perpendicular 2 x 2 Bent :

enter image description here

Or the bigger and more recent Technic, Pin Connector Block, Liftarm 1 x 3 x 3 :

enter image description here

Or even Technic, Liftarm, Modified H-Shape Thick 3 x 5 Perpendicular :

enter image description here

4
  • Thanks for your answer! Those parts don't fit for my construction problem.
    – spoekes
    Oct 15, 2022 at 18:55
  • 4
    @spoekes : could you then clarify your construction problem ? What are you trying to achieve ? You can edit your question with additional details. Oct 15, 2022 at 19:08
  • Updated the question.
    – spoekes
    Oct 15, 2022 at 19:44
  • 2
    @spoekes : Updated my answer accordingly - unfortunately no exact match for your desired topology. Oct 16, 2022 at 6:09
2

I have found the part on several marketplaces on aliexpress and bought it. I don't know if its from Cada or other clone company, but the parts are working fine.

enter image description here

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.