7

After I turn the device on, its screen is stuck at "starting..." for a long time. It hasn't change into the regular screen, and the light behind the button was still red (didn't become green). Is there a fix for this?

4

Try flashing the firmware. To get into firmware update mode, hold down the right button when turning the EV3 on. (You can also reset the EV3 without removing the battery by holding down the back and enter buttons for a few seconds.)

You can find much more detailed information on here.

  • I've tried flashing the firmware, but the EV3 brick gets stuck with the "Updating.." message and the Mindstorms PC application does not recognise that there is an EV3 brick attached. More details at bricks.stackexchange.com/questions/8630/… – Alticamelus Feb 18 '17 at 16:12
4

It sounds like the firmware needs a factory reset. Try this:

  1. Remove the battery for 10 seconds and then put it back
  2. Hold the Center and Right buttons until "Updating..." pops up on the display
  3. Connect the EV3 brick to your PC using USB
  4. Update the firmware using "Tools" -> "Firmware Update" in the EV3 software
  • This did not work for me because the PC does not recognise that the EV3 brick is attached. – Alticamelus Feb 18 '17 at 16:13
-1

Have you tried another OS like LeJOS that can be installed on an SD card? Insert that into the brick and start the brick up. I don't know if this will work, as I don't have a non-functional brick to try it with.

Have you ever had your brick connected to your computer and communicating properly? Are the comm port drivers loaded for the Lego brick to be able to communicate with your computer?

Do you have a friend with a working brick that can test that you have functioning comm drivers by connecting their functional brick with your computer?

What was the scenario that led your brick to stop working properly?

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.