Questions tagged [moc]
In the LEGO community MOC stands for 'My Own Creation'. Use this tag for questions regarding issues with constructing various features beyond simple structures.
69
questions
2
votes
1
answer
139
views
Selling a physical build from purchased instructions?
I have been trying to find information on this subject including contacting designers. I have heard as long as you don’t include the instructions in your sale, all is fine as that is the intellectual ...
- 21
2
votes
1
answer
71
views
Brick, Round Corner and/or Plate, Round Corner with Curved Cutout fitting radius of 88293 - Brick, Round Corner 3 x 3 x 2 Dome Top
I would like to build a rounded edge with 713 - Plate, Round Curved 4 x 8 Right as base and the 88293 - Brick, Round Corner 3 x 3 x 2 Dome Top on top.
Are there any rounded corner bricks or rounded ...
- 121
7
votes
1
answer
568
views
How can I add 1x4 tile stairs to my octagonal gazebo model?
How can I add 1x4 tile steps to the bottom of the front opening in the gazebo model below? The base of the gazebo is a 10x10 octagonal plate (part 89523). I have tried using wedge and round plates ...
- 355
3
votes
2
answers
682
views
How can I build a Lego slope of a rough 50 degree angle with preferably legal building techniques?
I am currently building a functional Lego minifigure-scaled escalator that can transition from flat platforms to stairwell. My first iteration for its guiding rail includes a slope of ~39.5 degree ...
- 313
-1
votes
4
answers
210
views
Are there any flat plates with beveled or sharp edges?
I'm currently making a functional minifigure-scaled escalator that ideally move like this. Progress has been made on both the stair slope and staircase design (both respectively pictured below), and ...
- 313
5
votes
1
answer
395
views
Can 9V train motors be linked and work together via the top power stud connection?
I'm building a MOC based on the 10219 Maersk Train, but going for the classic track power 9V system given the removal of need for batteries and slowly increasing availability of new 9V parts from ...
- 153
6
votes
2
answers
2k
views
Can one connect two technic pins end-to-end?
Who hasn't tried following some MOC instructions only to discover problems? This TIE Outlander build (free instructions) is neat but has several issues, the biggest of which are steps 44-46.
The ...
- 171
-1
votes
1
answer
230
views
Are either of these cars uncredited ripoffs from Rebrickable?
I'm no expert in searching Rebrickable, but turning up the minimum block count to over 3300 seriously cuts down on the number of matches. I've tried variations on the names and creative spelling, but ...
- 231
5
votes
1
answer
630
views
How do I build my LEGO slope so it connects to the flat top without any notable ridges?
I'm currently building a functional LEGO escalator that is minifigure-scaled and with staircases transitioning from flat platform to stairwell to flat platform. Here's my progress so far:
Here's the ...
- 313
0
votes
1
answer
117
views
How can I build MOCs well [closed]
I want to learn to build MOCs well. Is there any advice or websites/videos that give building advice and techniques for building
- 11
0
votes
2
answers
217
views
Who can make a custom made LEGO 777 airplane?
I work in an advertisement agency and our client wants to make a LEGO custom made airplane branded with their branding to be given to their offices. Is there anyone who can make the instructions and ...
6
votes
2
answers
265
views
How can I build the windows depicted in this image?
I am trying to figure out the building technique used in these windows. Does anybody know how to achieve those? Unfortunately I do not have pictures of the lower part.
Edit: I only want it to look ...
- 61
9
votes
2
answers
1k
views
How can I build a Lego slope of this exact angle with ideally only legal techniques?
I'm currently building a functional Lego escalator that is minifigure-scaled and with staircases transitioning from flat platform to stairwell. Here's my progress so far:
But with the design of the ...
- 313
17
votes
2
answers
3k
views
Simplest/cheapest way to build a tensegrity model?
My daughter saw some beautiful and interesting tensegrity (tensional integrity) LEGO models on the Internet:
and she would like to get one for her birthday.
We've got a few Harry Potter LEGO sets at ...
- 273
13
votes
3
answers
673
views
In LEGO: How to build a revolving magazine rack for 2x3 tiles?
I've been trying for months to come up with a design or parts for a 4-sided spinning magazine rack, like the old wire-style you would see in book stores. I need it to be fairly stable so I can put in/...
- 113
9
votes
3
answers
1k
views
MOCs: A question about using LEGO trademark
I recently made a MOC using LEGO bricks that I would like to sell. I know that, since this is my own construction I have the rights to do that, but my question is about the LEGO trademark. I want to ...
- 91
5
votes
2
answers
269
views
Are there any existing (or upcoming) aftermarket PoweredUp hubs?
I bought the Mindstorms v4 / advanced hub (in set 51515). It's a good set, and the Hub has some great features - notably a rechargeable battery, the ability to run "live" off of USB power, ...
12
votes
1
answer
2k
views
Motorized speedboat from Technic Catamaran alternate model?
The alternate model for the 42105 Technic Catamaran set looks a lot like a remote-controlled speedboat.
This set doesn't actually come with any motors, or even propellers, so obviously this model isn'...
- 13.3k
25
votes
1
answer
4k
views
Is it possible to build a working 100% LEGO glider with the Technic Catamaran sails?
In the past I've tried to make working LEGO gliders but since all the LEGO sails were either too small or the wrong shape the only thing that ever kinda worked was using paper over Technic beams (in ...
- 13.3k
1
vote
1
answer
84
views
What components can be decorated in LDD?
I was recently working on a UCS Republic Gunship MOC and was wondering what pieces are the best ones to decorate. Meaning, I would like to put in tiles with prints to look like the Republic Insignia ...
- 83
6
votes
1
answer
364
views
How deep can the axle go in the Powered Up L motor?
I am trying to make a MOC but I can't decide how long the axle could be so it can go fully into the motor but not extending out of the other side. Could you tell me how long the axle can go in?
- 217
4
votes
1
answer
514
views
What is the power of Lego Powered Up motors (M, L, and XL) and the Move Hub motors?
I am trying to build a setup that includes two propellers that can pitch up and down. I am debating whether I should use two motor to power each propeller and the other two to act as servos for each ...
- 217
6
votes
1
answer
1k
views
Simple way to build large circular plates?
I was wondering if there is a simple way to create a large circle or circular plates. I want to build a MOC of the Hero Factory assembly tower (In LDD first) but most of the pieces that form circles ...
2
votes
1
answer
181
views
What set is the head in this MOC from?
This MOC uses some kind of armour for the head and possibly the thighs. I thought it was Hero Factory but I couldn’t find it on Bricklink.
I would greatly appreciate any help in identifying it!
- 23
11
votes
1
answer
1k
views
What is a "MOD" and how does it differ from a "MOC"?
In this imgur post, one of the images is captioned "MODs and MOCs - Ocean Beach, Kingsman Tailor shop, Sanctum Santorum."
If a "MOC" is a "My Own Creation," what is (the most commonly used definition ...
- 211
4
votes
3
answers
974
views
Best Places to show MOC online?
Well, I finally finished one of my projects. Is there a friendly place online where I can post a few pictures of it for people to see?
- 4,807
1
vote
2
answers
132
views
Can anyone ID this set, please?
Has typical City plane tail. Has 2 ADU (Earth Defense) minifigs inside. Cannot find online.
Thank you for your help!
- 11
4
votes
0
answers
307
views
Europe based printing services for low quantity high quality custom printed tiles
I've found many websites providing a service for custom printing of LEGO tiles :
United Bricks
Brick Engraver
BrickSanity
Fab-Bricks
Citizen Brick
EclipseGrafX
Minifig Madness
BrickTactical
...
I ...
- 1,095
5
votes
2
answers
884
views
Going from LDraw/LeoCAD to Physical Set
Once I've designed a MOC using either LDraw or LeoCAD where can I go to get the bricks I need to then build that set in the real world?
I've been poking around forums for an hour now trying to get ...
1
vote
1
answer
977
views
Question about compliance of LEGO videos on Youtube and the new COPPA rules
I make some LEGO videos and post them on Youtube. I'm wondering whether I should flag them as "for kids" or not. Most (if not all) of them are not intended to be specifically for kids, but for all ...
- 965
5
votes
0
answers
720
views
MouldKing set 13132 - Original design, alternate build or cloned MOC?
It seems that Chinese clone brand Mould King will be producing a new set that looks a bit like LEGO's Disney Castle set (71040).
It has two times as many parts, however, and unlike LEGO's Disney ...
- 1,095
4
votes
1
answer
437
views
Examples of LEGO Rubber Bands Used For Friction Enclosure?
I'm working on a variant design for a MOC that includes a cover over an open area. The new design is based on a suggestion for a "cookie jar" style design made in another of my questions, LEGO ...
- 191
1
vote
3
answers
407
views
LEGO Enclosure Clasp
I'm working on refining my first MOC design for a LEGO dice tower with a landing area that can also be used as storage for dice and possibly some miscellaneous other table-top gaming "goodies". To ...
- 191
0
votes
2
answers
290
views
Publishing instructions for MOC based on Lego Technic set
Are there any copyright issues in the case of creating a MOC based on a Lego Technic set, and then publishing my own instruction and/or video for it?
Regards,
Pavel
- 131
5
votes
1
answer
534
views
Is this black and red speedboat model from an official set or a MOC?
Please help me: is this from an official set or an MOC?
- 1,285
8
votes
3
answers
762
views
How tall is the Saturn V set in LEGO units (studs, bricks etc.)?
I'm building a MOC to scale with the Saturn V set and am having trouble figuring out how tall the 1st stage engines are but the entire thing would be really helpful! Thanks!
- 83
1
vote
1
answer
3k
views
How to MOC the Rough Terrain Crane 42082
I recently got me the Rough Terrain Crane 42082 and had lots of fun while assembling it. I find it a decent Technic build and worth the price. Still I find it under-motorized. I would like to drive ...
- 1,285
1
vote
1
answer
168
views
The route of a major power line with branching smaller lines
In this discussion I was shown a diagram of how to bend a single power line around a street corner.
However, what if I have a straight major line with several minor lines branching off at right ...
- 263
4
votes
1
answer
153
views
The route a power line takes through a neighborhood
I have a small Lego town built. I want to add power lines. However, I don't know how to route the power lines through the neighborhood. Should I create one line that snakes between all the houses? ...
- 263
8
votes
1
answer
147
views
Are there any wheels or rings that fit in pin clips?
I was experimenting with Lego part 16091 Vehicle Steering Wheel Small and various clips, mainly the ones that fit onto bars. To my frustration I found that the clips do not engage at all with the ring ...
- 183
2
votes
1
answer
893
views
Utility pole and angles
I am using the following MOC from the Internet:
http://www.moc-pages.com/moc.php/8435
This model is fine if the sets of power lines are all in a straight row. But what about at an angle? How does ...
- 263
9
votes
1
answer
1k
views
Help in identifying elements used on LEGO Batman movie's Daleks
I've been working on making a replica of the Dalek from LEGO Batman.
I've worked my way through this video tutorial and the author identifies some differences between their (awesome) effort and the ...
- 193
4
votes
1
answer
442
views
How to power up MOC-0308, based on Technic 8297 Off-Roader?
I have built the following MOC, with details here and here.
It is pretty complete, although I would have tried some servo motor for steering.
But after I've finished it, I've got into trouble:
...
- 503
2
votes
1
answer
1k
views
What Technic set should I get for general Technic MOC?
I want to do some small machines in these books, But the sets recommended by the author are super expensive (set 8043 8053).
LEGO Technic Sets I Recommend (December, 2010)
Honestly, it is hard to ...
- 235
3
votes
1
answer
477
views
Linear Actuator Clicking
I have just finished working on a mock-up landing gear deployment mechanism, keeping it as simple as possible of course.
However one thing that I cannot seem to get rid of, is the small linear ...
- 31
16
votes
1
answer
2k
views
Can you identify this bevelled grey 2x1 piece?
I found this incredible MOC of the Ghost In The Shell robot and found a piece I have never seen before. Is it a LEGO piece and, if so, can you help me identify it?
Link to the image source: https://...
- 13.5k
5
votes
2
answers
847
views
The Coffee Chain
I have been looking all over the internet, since I first came upon the Larry the Barrista minifigure(got into mini figs kind of late), for the coffee chain logo. I love the takehome cup that comes ...
- 51
0
votes
1
answer
258
views
Help me plan and acquire pieces for my Star Wars MOC?
I wish to build a large LEGO Star Wars MOC. The basic idea I had was a well-fortified Droid factory, protected by a combination of droids, Sith, bounty hunters and Manalorians. And on the other side ...
- 1
6
votes
2
answers
12k
views
Tips for getting enough bricks to make a MOC with unified style
In the past, I made MOC's out of my LEGO Star Wars sets. At this point in my life, I don't really want to take those apart for pieces and I'd much rather have them on display. Recently, I have been ...
- 307
3
votes
2
answers
298
views
How do I robustly tilt a strength-1 wall?
Background
I am still working on my model of a ride-on mower, which has a seat that looks like this:
As you can see, the seat is mounted onto an inclined surface, which I realised to my satisfaction ...
- 2,174