All Questions

0
votes
0answers
72 views

Identification of lego set

I need this set identified. I dont have a box or manual. It came in a bag 1 and bag 2. Bag 1 had wheels and a few pieces. The photo is of bag 2
3
votes
0answers
63 views

Ordering of Pages in Printed LEGO Catalogues

While looking at some of the scanned LEGO catalogues on BrickSet, I have noticed that the UK catalogues (at least the ones I looked into) seem to be ordered "backwards" compared to what I'm used to ...
2
votes
1answer
259 views

What is the name or ID of this part?

Trying to locate this particular piece on BrickLink though I’m not having very much luck. It’s appears to be a grey bar piece/ zip line bar of some sort. Any assistance you can provide is greatly ...
2
votes
1answer
55 views

How tall is is the Saturn V set in Lego units (studs, bricks etc.)?

I'm building a MOC to scale with the Saturn V set and am having trouble figuring out how tall the 1st stage engines are but the entire thing would be really helpful! Thanks!
0
votes
1answer
48 views

How much does the full-size Lego Bugatti cost?

I read that the Lego developers have built a real driving Bugatti from Lego Bricks. Did they only use original Lego parts? Which ones and how many? Which sets does one need to buy and how many? And ...
2
votes
2answers
86 views

A Technic set from ~1997

I had a Technic set when I was a teen, about 1997 (by looking at the wheels, see picture). From what I remember, it was a tank truck. In its tank it was carrying 3 C batteries. In the picture, you can ...
3
votes
3answers
76 views

How deep can discounts on Amazon get?

I'm looking at the Hogwart Train set on Amazon right now and they are 20% off the MSRP. I recently bought the 60198 set at a 5% discount, now it is 16% off. I wanted to know typically how deep the ...
4
votes
1answer
67 views

Which set is this slope with holes from?

I picked up a bag of loose LEGO at a thrift shop and cannot identify which set this piece comes from: The holes pass all the way through the slope but have small details inside that prevent a ...
1
vote
1answer
32 views

Where to place your own ldraw pars

I just started designing LEGO instructions. I used LeoCAD to built the model and Web Lic to create the instructions. Being a Linux developer, Windows is hard to use and access. It seems bricks ...
3
votes
2answers
37 views

Need advice re Power Functions

My 11-year old son wants to add power to his creations but neither of us know quite how to start this new adventure. He doesn't have any Technic or Mindstorms sets. Looking through sets online, it ...
1
vote
1answer
50 views

What is the name/part# of this round part?

What is the name or part# of this round piece? Thanks.
0
votes
1answer
39 views

using a remote control

I have just started to get into using a LEGO Mindstorms EV3 robot. I know you have to create a program on the laptop, then it has to be downloaded to the EV3 block. Can you use a remote control to ...
3
votes
2answers
84 views

Color Chart Rosetta Stone

After discovering disparities between LEGO color names and families and 3rd party sites, I attempted to compile a sort of Rosetta Stone for the colors. Certain this is not complete but I believe a ...
5
votes
1answer
68 views

Trying to identify an old LEGO plate

Recently someone gave me a huge bunch of old LEGO pieces. Among the parts I found a white 4x6 plate with 4 wheel holes (those red wheels with a metal pin), a hole in the middle and an 2x1 extension on ...
4
votes
0answers
36 views

I'd like to build a mechanism to press buttons on a remote control. What is a good basic approach to use?

I have a small remote control like device with about 11 buttons. The centers of each button are placed about 1.1cm apart, and each are about 0.7cm in diameter (this means about 0.4cm between the edges)...
0
votes
0answers
57 views

Looking for what set so I can find instructions

The only info I have is the 5 and the 2011 LEGO group with 135149 on it. Lots of colorful pieces except for a clear rectangle square
7
votes
1answer
94 views

What is the three-position lever in the Bugatti Chiron supposed to do?

I've just finished assembling the Bugatti Chiron (42083), and there's a three-position lever in between the two seats that -- probably -- isn't working: one position connects the wheels to the engine; ...
4
votes
1answer
43 views

3rd Party Light Kits

Does anyone have experience with any of the 3rd party lighting kit companies for sets? Do you have any information or stories about how these lighting kits work out in practice? These are the two ...
1
vote
1answer
56 views

Looking for a spike

I spend some hours looking for the part attached to the microfigure of this picture: Can anyone identify the spike attached to the head of the microfig.
0
votes
1answer
35 views

Selling completed models

I'm am looking to sell completed models but do not want to disassemble them. Can someone point me in right direction?
7
votes
2answers
71 views

Looking for an affordable high density storage solution for my individual bricks

As my collection of bricks is growing, my storage space is limited and I'm increasingly interested in doing my own MOCs, I'm looking for a high density storage solution to keep my individual pieces ...
3
votes
2answers
71 views

What does each part do exactly?

It's been a few years since I bought a Lego Mindstorms (v2) which comes with the technic style pieces. There's beams, axels, rods, connectors... but the majority of the times when I'm building (my ...
3
votes
0answers
50 views

Two LEGO Powered Up engines with reverse direction

I have 2 LEGO 60197 City Passenger Trains and I would like to attach both sets together and un them on the same channel. The problem with the current disposition of the bogies is that reversing the ...
4
votes
1answer
46 views

Help! Unidentified #2 bag 2007!

It's driving me crazy! I recently purchased legos from a local goodwill. It looks like there's several Star Wars sets from 2007-2008 that are missing lots of pieces. I was assuming this bag was from a ...
2
votes
0answers
38 views

How many rotations or degrees do you need to turn your robot?

I have an EV3 Home edition. I have made a tribot. Two main motors for the wheels and a caster in the back. To complete a full turn in place I need to set the rotations to 2.32 or 835 degrees. Does ...
0
votes
1answer
28 views

Problem With Bionicle Joint Sockets

I'm pretty sure that serious Bionicle fans have all dealt with cracking of the joint socket pieces. However, is super-gluing the broken parts a solution? I'm worried that the joint socket won't be ...
2
votes
2answers
44 views

Which programming environments or APIs are available for the lego BOOST?

Over the holidays I tried the following Python library: https://github.com/undera/pylgbst but I couldn't get it to work. Then again my knowledge of Python is very limited. I'm more experienced with C+...
4
votes
1answer
89 views

What is LEGO Xtra?

I've seen a number of small polybags in stores branded LEGO xtra. What are these?
7
votes
1answer
862 views

9398 the front wheels rotate in the opposite direction to the rear wheel

We've just finished 9398 4x4 Crawler. Everything looks good, the motors work but the front wheels rotate in the opposite direction to the rear wheels, they also turn in opposite directions. What could ...
2
votes
3answers
61 views

EV3 Multiple conditions: wait sensor activation for N seconds or

How to program EV3 to wait for a sensor activation for at most X seconds? If the sensor is activated in the given time, begin sequence B. If it is not activated in X seconds, begin sequence A. ...
-2
votes
1answer
86 views

Has Anyone Ever Reprinted a LEGO Powered Up Connector With A 3D Printer?

Has anyone ever reprinted a LEGO Powered Up connector with a 3D printer? Currently, I'm using a modified SATA adapter for some LED lights on my train.
0
votes
1answer
66 views

why isn't lego updating the 9V train sets to the current system? [closed]

My son is getting to the age where he is ready for the Lego trains. I looked through the City and Train sets. It seems that Lego really recycles the Fire and Police themes over and over again, while ...
6
votes
1answer
245 views

What is this from?

My dad recently gave me a large box of legos that belong to sets. I found two pieces that appear to be the front of a car. I was wondering if you guys could help me out. I would love to know what it ...
1
vote
1answer
78 views

Help Identifying LEGO With A Pink 3(`(00) ´ )Ɛ Face

I cannot add a picture, but they are green, brown, and pink pieces. One of the pink has what looks like a pig's face.
4
votes
1answer
79 views

LEGO Master Builder Academy instructions

My kids picked up a few LEGO sets from the Master Builder Academy series recently that do not come with instructions in the packaging. According to the support team at LEGO.com this series was ...
0
votes
1answer
75 views

My Lego Technic 42082 wheel stuck and can't move [closed]

After I finished my 1st manual book, I found out that my crane wheel can't move. May I know which part that I did incorrectly?
-1
votes
1answer
60 views

Is EV3 Device Manager still active?

Link to https://ev3manager.education.lego.com/ is broken - will this be fixed?
4
votes
1answer
65 views

How to install Firmware 1.10E on an EV3 home/retail edition brick

If and how can you install firmware 1.10E on an EV3 brick from an home/retail edition set (instead of an education set)? Updates 1.0E9 are only recognized from the Mindstorm software, also with ...
1
vote
2answers
92 views

Help identifying giant blue LEGO Bionicle set

I have what appears to be a giant Bionicle. The head is the size of a small human head almost the size of a mask. It is blue in colour and in 5 bags. It looks like more than 100 pieces. The ...
1
vote
1answer
46 views

Can I push the train of 60052 [duplicate]

We more like to push trains with hand. There were old ones, like the train of set 2741, where when pushing the engine, the contact became loose between the axis and the cog wheel. Can I count some ...
0
votes
1answer
65 views

HELP I have gotten Lego package, no box and no instructions

these packages Were all unopened, Only package number five came with a Ninjago mini figure. Could someone possibly be able to get me the box information so I can look up the instructions! picture with ...
7
votes
1answer
443 views

Are these models legit sets or MOCs?

Are these 4 historic car models legit sets or MOCs? If official sets do you know the set numbers? How can I add more pictures then one?
5
votes
2answers
400 views

Multiple powered up trains on 1 Bluetooth controller?

My daughter got a Passenger Train for Christmas and I converted one of my old 9v trains to run using the powered up system. Is it possible to run the 2 trains independently or concurrently (preferably ...
3
votes
6answers
246 views

The controversy around clone brands

The origin of the self-locking building bricks Hilary Page was born in 1904 in Sanderstead, England. Along with several partners, Page decided to go into the toy business in 1932. In 1936, he began ...
7
votes
1answer
84 views

Looking for sets to use as components of a 1930s - 1940s European city

I'm planning to build a 1930s / 1940s European city (like Paris, London, Prague, ...). As buildings, I'm currently going for modulars that could pass for pre-1950 European buildings, possibly with ...
6
votes
1answer
131 views

Is this non-disassemblable LEGO instruction step real?

I've seen this image shared a few times around the internet as an example of a LEGO instruction step that assembles pieces in such a way that they cannot be disassembled (at-least not without some ...
5
votes
2answers
108 views

How can I assemble 2 opposing gears so that the axle rotations are perfectly parallel?

Due to the way all the modern LEGO gears are perfectly quarter-turn symmetrical, there doesn't appear to be any way to assembly 2 opposing gears such that I get a 2 perfectly parallel axles. This ...
1
vote
0answers
50 views

What can I do with all my brick separators? [duplicate]

Since LEGO has started adding a brick separator to each of their larger sets, I have more brick separators than I know what to do with. Due to inflation, they also aren't really worth anything to try ...
5
votes
0answers
50 views

Replace Battery in LEGO Dino Attack Light-Up T-Rex Head?

Is it possible to replace the battery of the LEGO Dino Attack T-Rex heads? There's a button on the top of the head that makes the eyes and tongue light up red. There doesn't seem to be any obvious ...
3
votes
0answers
38 views

Capture video stream from LEGO Studio Camera (Logitech USB webcam) in ev3dev?

Once upon a time, LEGO made a digital camera for the LEGO Studios and Mindstorms line. Internally it's an old USB Logitech repackaged in a LEGO housing. It could also be used with the old LEGO ...

15 30 50 per page