29

Technic, Engine Cylinder with Side Slots https://www.bricklink.com/v2/catalog/catalogitem.page?P=2850


28

That's a Creeper torso (officially 19734 Creature Torso Blocky with Cube Feet). If you're familiar with Minecraft, you'll probably recognize it once you know the context:


27

That is the Vehicle, Trailer Base 4 x 13. It came in one set, the #378 Tractor from 1972. Found by searching first 4x9 (didn't find it) and then 4x13 (the total length).


23

It looks like a "short shot" of Minifigure, Utensil Bottle, Erlenmeyer Flask with Trans-Purple Fluid Pattern (pictured below) which is included in the set. I would even say it lacks the Trans-clear "coating" around Trans-Purple piece of the combined element. Short shot - is a term used in LEGO community to describe an uncommon occurrence ...


18

The part is Window Round 3 x 3 x 2 (73878). It was a new mold for 2021, and one of its first uses was as windows on Andrea's House (41449). This piece can be used on buildings anywhere you'd like a curved window. It is easy to imagine how it could have been used on earlier sets, such as the "curved" windows on the Pet Shop: This part introduces ...


18

The models featured on Bricklink include a parts list, model file and instructions. You can see there that the curved tent is a skateboard ramp and the edges are 1x4 tiles attached with Technic pin 1/2.


17

I assume you aren't looking for complete instructions, but rather interested in main element used to construct tent. In such case Sports Arena Section / Skateboard Ramp (43085) has been used in Tan.


16

I believe that this is 65578 attached to an angled lightsaber hilt and a light reflector dish.


15

It's hard to tell for sure, but I believe that it is Bar Holder with Clip (11090). The size and shape look about right to me, and it is widely available in those colors.


14

We call them space binoculars. They're like binoculars, but in space!


14

The number indicates part 4719 - bicycle frame. As you can see, it has a straight handlebars and kickstand. Your particular piece must have been modified to fit some specific purpose. Lego does not reuse the same mold numbers much, and never on the purpose, so I highly doubt if it was molded that way.


13

These parts belong to a ton of different sets. 1st picture Black Engine, Smooth Large, 1 x 2 Thin Top Plate can be found in 6 sets. Black Tail with Rounded Top, Aquazone Aquashark Blue Shark with Red 'X' Pattern belong to one of three sets. Slope 33 3 x 2 with Exploriens Logo Pattern was available in 6 sets. White Hinge Train Gate 2 x 4 with Satellite ...


13

Keyword for this torso on Bricklink is "flower". Torso Female Wrapped Dress with Pink Flower Pattern / Yellow Arms / Yellow Hands It was used just for Fairy from Series 8 of Collectable Minifigures:


13

This is Part # 45301pb023 : Wedge 16 x 4 Triple Curved with SW V-wing Starfighter Pattern (Sticker) It appears in 7915: Imperial V-wing Starfighter


13

The black part is: Part# 42446 : Minifigure Neck Bracket with Back Stud - Thin Back Wall or Part# 28974 : Minifigure Neck Bracket with Back Stud - Thick Back Wall


12

The first tile is Tile 1 x 2 with Groove with Copper and White Circuitry, Red Rectangle and 4 Squares Pattern Appearing in these 10 sets. It looks like yours is Dark Gray. The second tile is Tile 1 x 2 with Groove with Vehicle Control Panel Pattern Appearing in these 82 sets. It looks like yours is Dark Bluish Gray.


12

These are Train Base 4 x 7 with Wheels Holder with Train Wheel with 2 x 2 Stud Center, Traction Teeth and Turntable 4 x 4 Complete, Perfectly Round They were found in two sets from 1966:


11

That would be part 30106 Minifigure, Utensil Crystal Ball Globe 2 x 2 x 2. It has a small indentation on top, which is probably how they were able to balance it in that picture.


11

That would be Part # 4594 : Windscreen 2 x 4 x 2 Vertical with HP Shrunken Head Pattern from Set # 4755: Knight Bus


11

The hinge is 3149c01. The engine is 3475 (or possibly other, similar molds).


11

RSchulz has correctly identified two elements, so I'll address the last one which is Vehicle, Base 4 x 12 for Steering Gear (803). Light Gray colored version was available in 3 sets.


11

It's Vehicle, Base 4 x 6 Racer Base with Orange Wheels (I found it on bricklink by searching for "vehicle base")


10

You can find all of these elements listed on Bricklink under "Technic, Steering" category Assembled combinations are: Technic, Steering Portal Axle, Housing with Dark Bluish Gray Technic, Steering Wheel Hub 3 Pin Round (92908 / 92909) Technic, Steering Axle with 2 Pin Holes and 2 Axle Holes with Dark Bluish Gray Wheel Hub (23801 / 92909) Technic,...


10

It looks like a space gun, part 3959.


10

Here's an example of how walls have been built. If you look closely on original pictures you can also see 2 x 2 top hinge piece (marked in Yellow here) used for attaching it on the bottom. Roof is, however, not connected to the top edge. This is how top edge looks on one side of the roof as it is made out of Technic pieces, mostly: Parts are: 4623a or ...


10

That would be Part# 30360 : Cylinder 3 x 6 x 2 2/3 Horizontal - Round Connections Between Interior Studs or Part# 93168 : Cylinder 3 x 6 x 2 2/3 Horizontal - Square Connections Between Interior Studs Both are essentially the same part, just a mold variation


10

It's actually originally a Hero Factory piece. 11338 - Hero Factory Weapon - Axe/Sword with Jagged Blade A red one is exclusive to 70203 - CHI Cragger.


9

This one 47674 or this one 47674 These are X-POD containers.


9

Piece 1 is Mega Bloks. Here's is a picture of a head (twice) that goes with it, and some yellow hair as well.


9

No. It's older than that. This element has been in 9 sets, in trans-dark blue (as pictured) it has been in 4: https://www.bricklink.com/catalogItemIn.asp?P=4228&colorID=14&in=A that bricklink says came out in 1981 and 1983


Only top voted, non community-wiki answers of a minimum length are eligible