11

I'm trying to recreate the building in the picture (Berghain by Matteo Plateroti), but I'm having trouble finding what bricks, tiles, or brackets were used at the bottom layer with white stripes.

I assume those are 1x2 tiles at the front but what are they attached to? enter image description here

Close-up (cut from a larger resolution image): enter image description here

Improve this question

2 Answers 2

Reset to default
16

Picture little blurry, but this is what I see... The builder attached the tiles to Part Number Forty-Seventy.

Part #4864a, the (black) window piece is really trans-black in color, but the way it's used here, with it being reversed and all, obstructs the proper identity of the white 1x1 bricks, causing some viewing tricks on the eyes...

enter image description here

enter image description here

enter image description here

enter image description here

enter image description here

Improve this answer
1
  • Thank you so much for this! Really appreciate it.
    – Katniss
    Commented Nov 28, 2019 at 6:11
3

Welcome to Bricks.SE! The picture is a bit of an eye-chart, but upon zooming in you can see that the white lines (and the grey lines in other pillars) are half a plate high. This means they are likely the vertical part of a white 99780 Bracket 1x2 - 1x2 Inverted or 99207 Bracket 1x2 - 2x2 Inverted, placed vertically facing down against the back structure of the building.

enter image description here enter image description here

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.